У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Ceramic heating element for low-voltage soldering irons type 907 from all manufacturers, with built-in thermocouple (soldering irons from soldering stations).
Structurally, the heater is a spiral made of thin nichrome wire wound on a ceramic rod and placed in a ceramic tube-sheath. The front end of the tube is plugged either with a ceramic compound or with a plug also made of ceramic.
Specifications:
length to stop sleeve: 54 mm
length with sleeve: 64 mm
diameter: 3.7mm
type of built-in temperature sensor: thermocouple
In a working element, the resistance between the heater terminals is 15-17 Ohm, the resistance between the thermocouple terminals is about 0.5 Ohm. When replacing the heater, pay attention to the polarity of the thermocouple connection.
Lead color coding: heating element wires are one-color (usually red), thermocouple wires are of different colors.
Attention!this heater cannot be installed in soldering irons for stations designed to work with a heater typeHAKKO-1321... This is due to the incompatibility of the temperature sensors.
In the heating elementHAKKO-1321a thermistor is used as a temperature sensor, not a thermocouple.
The question often arises: how to distinguish a nichrome heater with a thermocouple from an elementPTC type with thermistor?
First of all, in appearance. The nichrome heater has a smooth ceramic sheath. The PTC-type heater has a characteristic longitudinal recess along the entire length of the rod, which is clearly visible even on the remnants of a destroyed element.
If the element is destroyed, then the presence of remnants of a nichrome coil clearly indicates the type of heater. PTC-type heaters do not have a coil wire inside.
You can also navigate by electrical parameters by measuring the resistance, but this must be done in advance while the soldering iron heater is in working order.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
![Soldering iron heater 907 series # 132A with thermocouple [ceramic, 40W, 24V]](/files/pic/tools/lukey_olya/011156-2-1.JPG)
![Soldering iron heater 907 series # 132A with thermocouple [ceramic, 40W, 24V]](/files/pic/tools/lukey_olya/011156-2.JPG)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
