Dielectric varnishPLASTIKbased on acrylic resins, it is most suitable for use in electronics and electrical engineering.
Forms an elastic, glossy transparent layer that resists acids, salts, mold, corrosive fumes, alcohols, thermal and mechanical influences, alkalis, moisture and other manifestations of an aggressive environment.
The coating remains effective over a wide temperature range from –70°C to+120°C.
Forms a stable film on metals, plastics, wood, glass.
Allows soldering through the protective layer when a PCB repair is required.
Cramolin PLASTIKresistant to salt spray and mildew.
Characteristics:
-
application: aerosol spray
-
color: colorless
-
density: 0.88 g/cm³
-
drying time at room temperature: after 25 min. dries before sticking, after 48 hours dries completely
-
oven drying time: 2-4 hours at 60-70°C (after preliminary drying at room temperature for 10-15 minutes)
-
minimum layer thickness: 20-50 μm
-
surface area to be treated: 10-20m²/l
-
heat resistance: -70°С -+120°С
-
viscosity 12c (DIN 53211)
-
resistance to: acids, salts, corrosive vapors, alcohols, thermal and mechanical influences, alkalis, moisture
-
surface resistance: 5 × 10¹4 Ω
-
insulation resistance: 10¹4Ω
-
dielectric strength: 21kV/mm
Application area:
Protection of printed circuit boards, components, wires, cables, transformer and motor windings, etc.
Elimination and prevention of current leakage, corona discharges, short circuits.
Corrosion protection of components exposed to adverse weather conditions.
Moisture protection for various materials such as cardboard, wood, leather.
Tips for applying varnish:
Before application, the surface must be free of dirt, grease, etc. Apply the aerosol by spraying from a distance of approximately 30 cm, otherwise drips may form on the surface.
To ensure an even coating, the varnish must be applied in 2-3 layers with intermediate drying for 20-30 minutes.
A clogged nozzle of an aerosol can is washed with a solvent, acetone or turpentine.
Техническое описание
Описание на сайте производителя (на английском)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
