Soldering Station Lukey-852D+

Product picture

Product description format_size zoom_out zoom_in

Hot air two-channel assembly and desoldering station. Digital control is implemented on PIC controllers (2 pcs). Air is pumped into the hair dryer by a diaphragm compressor.

• two LED displays with digital indication of the temperature of the hot air gun and soldering iron.
• The hot air gun and the soldering iron have independent temperature control, electronic temperature control provides good thermal stability even with a sharp change in the volume of supplied air.
• hot air gun with a power of 350 W, maximum air supply capacity - 23 liters/min, included - 4 cylindrical nozzles of various diameters, crimping.
• the function of automatic cooling of the hot air gun after shutdown protects the heating element (the power to the heater is turned off, but the air supply continues with maximum performance, after blowing down to a temperature below 50C^aboutthe hair dryer channel is completely turned off.
• antistatic design, galvanic isolation, 24V supply voltage ensure the safety of electronic components and the board.
• soldering iron 24V, power 50W; The used ceramic heating element HAKKO 1321 (made in Japan) ensures reliable operation, durability and temperature stability.
• resistive-type soldering iron thermosensor (built into the heater), which provides low inertia and greater accuracy of temperature maintenance compared to a thermocouple;
• in the basic configuration, the sting is a cone with an end face of 0.4 mm, durable, chrome-plated; The design compatibility of the soldering tips with the HAKKO and XYTRONIC soldering systems provides a wide range of tips.
• The supplied stand with a cellulose sponge for wet cleaning of the tip reliably protects the soldering iron from mechanical damage when dropped, as well as from accidental touching of heated parts.
• Combined design saves desktop space.

In terms of its technical characteristics and price level, the station most closely matches the tasks of repairing, first of all, portable electronics (mobile phones, video cameras, etc.), household appliances, for prototyping and development.

Dimensions:
width: 185 mm (with installed hair dryer holder - 250 mm)
height: 135 mm
depth: 250 mm.

ATTENTION!

Unscrew the compressor transport screw before operation (located on the base of the station, on the lower side, closer to the front panel).
Working with the transport screw that has not been removed is characterized by strong vibration and leads to mechanical damage to the soldering station!

Warranty obligations:for all models of soldering stations and board heaters Lukey, ProsKit, Aoyue, Sunnko, Baku are 3 months.
The warranty does not cover:on heating elements and soldering tips, which are consumables.