The board allows prototyping of various electronic circuits easily and without soldering, and is reusable.
Resource - 10,000 component installations.
It is used for mounting accessories with hard leads with a diameter of 0.3-0.8 mm.
Contact material: phosphor bronze, nickel.
The board consists of 2 blocks of the main field, interconnected by grooves of 440 contact points each.
Power buses in the amount of 5 pieces of 100 points are located on the three outer sides of the field and between the blocks of the main field.
The contact field is fixed on a metal base plate.
In the upper part of the base there are holes for installing laboratory power terminals (3 pcs, multicolored, included).
Also, the board is equipped with self-adhesive rubber feet.
Characteristics:
board size: 174 x 132 x 9 mm
number of contact points of the main field: 1280 pcs
number of power bus contacts: 400 pcs (4 blocks of 2 x 5 x 10 contacts)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
