ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.



Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Tools and equipmentDrills, cutters, burs, taps, diesTwist drills with cylindrical shank
Код товара:
033094

Cobalt drill for metal 5,3mm HSS-Co M35 spiral steel C/C cobalt 5%

High-speed cobalt steel M35. For drilling metal, fiberglass and softer materials. Cylindrical shank. Diameter 5.3 mm.
Cobalt 5%.
Cobalt drill for metal 5,3mm HSS-Co M35 spiral steel C/C cobalt 5%
NOT available.
Expected price: 40,00 UAH
from 1 pc : 40,00 UAH
from 3 pcs : 38,00 UAH ( -5,0%)
from 10 pcs : 36,00 UAH ( -10,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

Drill size:
  • diameter D: 5.30 mm
  • total length L: 85 mm
  • spiral length F: 50 mm
  • sharpening angle: 135 °

Twist drill from high-speed tool steel HSS-Co M35 according to DIN 338 (domestic steel marking - P6M5K5).
Complies with GOST 10902-77.
High cobalt contentCoin the alloy (about 5%) significantly increases the productivity and durability of the drill even when compared to a titanium coated surface. Alloying with cobalt also increases the red hardness (the ability to withstand overheating without degrading properties).
Without additional hardening coating.
Right-hand cutting, sharpening 135 °, i.e. for hard materials.
Sanded.
Two cutting edges, two spirals.
The shank diameter corresponds to the drilling diameter.
 
The 135°angle sharpener defines the recommended application for drilling the following materials:
  • alloyed and unalloyed steel
  • non-ferrous metals
  • cast iron of different grades
  • cermets
  • hard plastic, including fiberglass

Characteristics:
  • drill type: twist
  • direction of rotation: right-handed
  • sharpening angle: 135 °
  • DIN steel grade: HSS-Co M35
  • steel grade according to GOST: R6M5K5
  • cobalt content: ~ 5%
  • hardening surface coating: no
  • color: dark bronze
Attention!
Drilling of stainless steel must be done at the required drilling speeds, it is imperative to use coolant (cutting fluid). The use of coolant on any metal multiplies the service life of the drill.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…