З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
The driver enables the LEDs to operate in soft load mode - 300 mA. With a maximum permissible current for 1 W LEDs equal to 350 mA.
To ensure the temperature regime, you can regulate the output current of the driver by selecting the resistance of the resistor in the CS circuit (see datasheet). On the board it is designated as a composite resistor RS1-RS2.
At the factory, 1 and 2 ohm resistors are installed in parallel. This gives a total resistance of approximately 0.67 ohms and an output current of approximately 300 mA.
Empirically, we got the following results:
- with resistance RS1-RS2 = 2 Ohm, the output current is 130 mA.
- with resistance RS1-RS2 = 1 Ohm, the output current is 220 mA
.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
