WIFI relay 1 channel SONOFF,+443Mhz

Product picture

Product description format_size zoom_out zoom_in

Wi-Fi relay to control any electrical appliance, socket or switch from a smartphone via the Internet using a special Ewelink applicationfor androidorfor IOS... The functional Russian-language Ewelink application will allow you to easily control all the functions of the device.
This model is an extended version of the moduleSONOFF BASICwith the ability to control usingremote control at 433MHz... The remote control itself is not included in the package. Supports most 3rd party 433MHz remotes.

Main characteristics:

• Supply voltage 90-250 VAC
• Load current max. : 10A
• Wi-Fi support
• Support for 433 MHz remotes
• Display online device status (enabled/disabled)
• Remote turn on/off via Internet
• Support for 8 timers (Enable/Disable according to the specified algorithm)
• Control an unlimited number of WiFi relays from one smartphone
• Easy installation, connection and use
• Dimensions 90 * 40 * 25 mm

Note:for the device to work, it is necessary to have a WI-Fi router within its range for the relay to communicate with the Internet.


Program setting:download and run the Ewelink appAndroid , iOS... Register in the application by entering your email and clicking the "Send code" button. A confirmation code will be sent to the email within a few minutes. Enter the code into the app.

Adding a device:connect the device to power. Press and hold the button on the device for at least 5 seconds. The LED will start flashing quickly, release the button. In the app, click "+" or "Add device" and click "Next". Enter the name of your Wi-Fi network and its password. The program will detect your device and add it.

Connection:the device is powered from the "Input" side. The neutral wire is connected to the terminal strip marked "N", the phase wire - marked "L". The "Output" output is connected in the same way. When the relay is closed, the supply voltage appears at the output.

To bind the remote control:press quickly twice the button on the device body while holding down the button on the remote control. Do not release until the LED starts flashing constantly red. To untie the remote control, you need to quickly press the button on the device body three times. The red LED will light up and will stay on for at least 3 seconds.