ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN

Forgot your password?
Register
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Development toolsEnginesStepper motors
Product code:
027711

Stepper motor with reducer 28BYJ-48

Unipolar stepper motor. 5V model 28BYJ-48.
Stepper motor with reducer 28BYJ-48
In stock
42,00 UAH × = 42,00 UAH
from 1 pc : 42,00 UAH
from 10 pcs : 39,90 UAH ( -5,0%)
from 50 pcs : 37,80 UAH ( -10,0%)

Current balances:

Магазин-Днепр
100 pcs
For Online Orders
100 pcs

Product picture

Шаговые двигатели Nema и драйверы шаговых двигателей

Product description format_size zoom_out zoom_in

Unipolar (unipolar) 4-phase stepper motor with gearbox. It is used for discrete (step-by-step) rotation of an object (gear, wheel, movable mechanism) by the motor shaft. Used in robotics, DIY devices, air conditioner swing blinds, small fans, etc. Recommended for use withStepper motor driver ULN2003 .

Main characteristics:

  • Motor type : unipolar stepper motor
  • Rated operating voltage: 5 in
  • Connection: 5-pin
  • Number of phases: 4
  • Motor step: 5.625°/ step
  • Gear ratio: 1/64
  • Frequency: 100 Hz
  • DC resistance: 50 Ohm ±7% (25°C)
  • Frequency under load: > 600 Hz
  • Idling frequency: > 1000 Hz
  • Torque: > 34.3 mN * m (120 Hz)
  • Self-positioning moment :> 34.3 mN * m
  • Stopping moment: 600-1200 g * cm
  • Traction: 300 g * cm
  • Insulation resistance: > 10 MOhm (500 V)
  • Insulation class: A
  • Noise : <35 dB (120 Hz, no load, 10 cm)
  • Weight: 35g
Thus, in a 4-step mode, a motor with a gearbox makes 2048 steps per revolution, in an 8-step mode - 4096. The technical documentation recommends exactly the half-step mode (8-step control signal sequence).
 

Connection to the ULN2003 controller A (blue), B (pink), C (yellow), D (orange), E (red, middle lead of windings). It is not recommended to supply power from the Arduino controller as the motor draws a lot of current and can damage the controller. The most suitable method is to use the AC adapter (power supply) or battery.
 

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

Этот товар упоминается в статье Шаговый двигатель 28BYJ-48-5V и плата ULN2003


The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: View more…

Последние просмотренные товары Посмотреть Последние...