Shown goods: from 1 to 50 (192 total)
In stock
Promotions
Discounted
| Code | photo_camera | Remains | shopping_cart | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 021527 |  | Module The module for the STEP-DIR instruction set provides step, half step, microstep 1/4, microstep 1/8, microstep 1/16. Used in 3-D printers and CNC machines. | total: 141 pcs маг ДП: 141 pcs |
| |||||
| 021638 |  | Module The module for the STEP-DIR instruction set provides step, half step, microstep 1/4, microstep 1/8, microstep 1/16. Used in 3-D printers and CNC machines. Heatsink included for greater load capacity. | total: 146 pcs маг ДП: 146 pcs |
| |||||
| 021642 |  | Module Shield for Arduino Mega 250 that turns it into a 3D printer. | total: 13 pcs маг ДП: 13 pcs |
| |||||
| 021803 |  | Module Single-axis stepper motor controller with opto-coupler. Current stabilization up to 3 A. | total: 6 pcs маг ДП: 6 pcs |
| |||||
| 023197 |  | 3D Printer Part | total: 10 pcs маг ДП: 10 pcs |
| |||||
| 023831 |  | Carriage | total: 8 pcs маг ДП: 8 pcs |
| |||||
| 023835 |  | Linear bearing Linear bearing for 12mm shaft. | total: 80 pcs маг ДП: 80 pcs |
| |||||
| 023837 |  | Linear bearing on shaft Linear bearing for 12mm shaft.
In the corpus. | total: 79 pcs маг ДП: 79 pcs |
| |||||
| 023838 | | Linear bearing on shaft | total: 37 pcs маг ДП: 37 pcs |
| |||||
| 023840 |  | Linear bearing Linear open bearing in housing for 20mm shaft | total: 185 pcs маг ДП: 18 pcs |
| |||||
| 023841 |  | Support rail 16mm linear cylindrical shaft on 0.35m long support | total: 59 pcs |
| |||||
| 023842 | | Support rail Linear cylindrical shaft 16mm on a support 0.5m long | total: 81 pcs |
| |||||
| 023843 | | Support rail Linear cylindrical shaft 20mm on a support 0.5 m long | total: 17 pcs |
| |||||
| 023844 | | Support rail Linear cylindrical shaft 20mm on a support 1m long | total: 18 pcs |
| |||||
| 023848 |  | Shaft support on the base | total: 140 pcs маг ДП: 140 pcs |
| |||||
| 023858 |  | Calibrated guide shaft TFC16*1000L SFC16 Steel shaft, diameter 16mm, length 1000mm. | total: 35 pcs маг ДП: 35 pcs |
| |||||
| 023859 | | Calibrated guide shaft TFC20*1000L SFC20 Steel shaft, diameter 20mm, length 1000mm. | total: 1 pc маг ДП: 1 pc |
| |||||
| 023978 |  | 3D Printer Part | total: 5 pcs маг ДП: 5 pcs |
| |||||
| 023979 |  | 3D Printer Part | total: 10 pcs маг ДП: 10 pcs |
| |||||
| 026654 | | Support rail Linear cylindrical shaft 16mm on a support 1m long | total: 28 pcs |
| |||||
| 026655 |  | Ball screw 1000 mm+nut SFU1605 Model SFU1605-3. Length 1000mm. Shaft ends for bearings are not machined! | total: 22 pcs маг ДП: 22 pcs |
| |||||
| 026656 |  | End bearing "Fish eye" spherical spherical bearing. M6 thread, LEFT !!! internal. Hole diameter 6mm. | total: 30 pcs маг ДП: 30 pcs |
| |||||
| 026657 |  | End bearing Fish eye spherical plain bearing. M6 thread. outdoor. Hole diameter 6mm. | total: 57 pcs маг ДП: 57 pcs |
| |||||
| 026666 |  | Linear bearing Linear bearing for 16mm diameter shaft. | total: 18 pcs маг ДП: 18 pcs |
| |||||
| 026667 | | Linear bearing | total: 9 pcs маг ДП: 9 pcs |
| |||||
| 027300 |  | Heated nozzle for 3D Pen RP100A 0.3mm | total: 1 pc маг ДП: 1 pc |
| |||||
| 027362 |  | Aluminum machine profile Profile length 1 meter. Factory sawing. | total: 5 pcs маг ДП: 5 pcs |
| |||||
| 027364 |  | Corner 20x28 to profile 20x20 | total: 2042 pcs маг ДП: 92 pcs |
| |||||
| 027365 |  | block 90 degrees. 20EL-M4 | total: 1404 pcs маг ДП: 204 pcs |
| |||||
| 027366 |  | T-nut 20x20 М4 L=10, H=3 , S=6 , K=6 , D=M4 | total: 6517 pcs маг ДП: 6517 pcs |
| |||||
| 027367 |  | Square nut-slider 20x20 M4 EU | total: 8514 pcs маг ДП: 514 pcs |
| |||||
| 027369 |  | L-connector 2020 | total: 173 pcs маг ДП: 33 pcs |
| |||||
| 027370 |  | T- bolt 20x20 М5x16 T-bolt for 2020 profile | total: 61 pcs маг ДП: 61 pcs |
| |||||
| 027372 |  | Intra-slot connector 2020 EU Intra-slot connector for European style 2020 profile
Length 100 mm, with set screws
| total: 139 pcs маг ДП: 139 pcs |
| |||||
| 027712 |  | Pay Interface board (controller) for working with CNC (CNC) Mach3 LPT version | total: 27 pcs маг ДП: 27 pcs |
| |||||
| 028500 | | Linear bearing Linear open bearing in housing for 12mm shaft | total: 311 pcs маг ДП: 311 pcs |
| |||||
| 028501 | | Support rail Linear cylindrical shaft 12mm on a support 1m long | total: 97 pcs |
| |||||
| 028502 | | Support rail Linear cylindrical shaft 16mm on a support 1.5m long | total: 112 pcs |
| |||||
| 028507 | | Calibrated guide shaft TFC16*500L SFC16 Steel shaft, diameter 16mm, length 500mm. | total: 3 pcs маг ДП: 3 pcs |
| |||||
| 028509 |  | Shaft support Support for mounting the shaft at an angle of 90 degrees in relation to the mounting plane, shaft diameter 13 mm. | total: 32 pcs маг ДП: 32 pcs |
| |||||
| 028535 | | Support rail Linear cylindrical shaft 12mm on a support 0.5m long | total: 45 pcs |
| |||||
| 028937 | | Support rail Linear cylindrical shaft 20mm on a support 1.2m long | total: 60 pcs |
| |||||
| 029456 | | Ball screw 500 mm+nut SFU1605 Model SFU1605-3. Manufacturer. Length 500mm.
Shaft ends for bearings are not machined! | total: 5 pcs маг ДП: 5 pcs |
| |||||
| 029688 |  | Module The module for the STEP-DIR instruction set provides microstepping up to 1/32.
Used in 3-D printers and CNC machines. Heatsink included for greater load capacity. | total: 401 pcs маг ДП: 401 pcs |
| |||||
| 029689 |  | Module | total: 101 pcs маг ДП: 101 pcs |
| |||||
| 030106 |  | Rail guide | total: 3 pcs маг ДП: 3 pcs |
| |||||
| 030162 |  | Linear bearing Linear open bearing in housing for 20mm shaft | total: 29 pcs маг ДП: 29 pcs |
| |||||
| 030167 |  | Linear bearing flanged Linear bearing for 10 mm shaft. Flanged, extended | total: 1 pc маг ДП: 1 pc |
| |||||
| 030170 |  | Linear bearing flanged Linear bearing for 12 mm shaft. With flange | total: 2 pcs маг ДП: 2 pcs |
| |||||
| 030171 | | Linear bearing flanged Linear bearing for 10mm shaft. With flange | total: 1 pc маг ДП: 1 pc |
|
