This is an efficient mid-power stepper motor driver based on the TB6600 chip. Suitable for professional and hobby CNC systems with bipolar stepper motors.
Supports microstepping down to 1/16 step. Maximum current up to 4.5 A; we do not recommend high currents without additional forced air cooling. Motor supply voltage 10-42 V.
Main specifications:
Driver chip: TB6600HG
Motor supply voltage: 10 - 42V
Rated motor current (adjustable) : 0.5 - 4 A
Maximum motor current (forced cooling): 4.5 A
Logic supply voltage: 4.75-5.25 V
Supported logic levels: 3.3 and 5 V
Microstepping: full, half, 1/4, 1/8, 1/16
Control type: step-direction
Maximum PWM frequency: 200 kHz
Overheat protection: yes
Overload protection: yes
Reverse polarity protection: no
Automatic current reduction up to 50%
Stepless reference voltage
Optoisolated digital input, high-speed 6N137 optocoupler
Dimensions: 82x50x35 mm
Weight: 100 g
Module pinout:
Arduino UNO wiring diagram:
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown