Shown goods: from 1 to 50 (170 total)
All product types · about filters and types
In stock
Promotions
Discounted
| Code | photo_camera | 1 | Remains | 2 | shopping_cart | ||
|---|---|---|---|---|---|---|---|
| 049797 | | LEFT-HAND tap M1.2(0.25) P6M5 set [through holes, metric thread] Tap for cutting LEFT-hand metric thread M1.2 with 0.25 mm pitch. | 20 pcs |
| |||
| 049798 | | LEFT-HAND tap M1.4(0.3) P6M5 set [through holes, metric] Tap for cutting LEFT-HAND metric thread M1.4 with 0.3 mm pitch. | 10 pcs |
| |||
| 049799 | | LEFT-HAND tap M2.5(0.45) P6M5 set [through holes, metric] Tap for cutting LEFT-hand metric thread M2.5 with 0.45 mm pitch. | 8 pcs |
| |||
| 049800 | | LEFT-HAND tap M3.0(0.5) P6M5 set [through holes, metric thread] Tap for cutting LEFT-hand metric thread M3 with 0.5 mm pitch. | 15 pcs |
| |||
| 047699 | ![]() | Concrete drill bit SDS-Plus, D=6мм, L=160мм, SD-0616 SDS PLUS S4 concrete drill bit 6x160 mm | 18 pcs |
| |||
| 033186 | ![]() | Tube drill diamond, 10 mm, 2 pcs per blister, SD-0347 Diamond tube drill 10 mm, 2 pcs per blister. | 1 pc |
| |||
| 033185 | ![]() | Tube drill diamond, 8 mm, 2 pcs per blister, SD-0346 Diamond tube drill 8 mm, 2 pcs per blister. | 1 pc |
| |||
| 038218 | ![]() | Annular cutter holder bi-metal 7/16" with pilot drill 7/16” arbor with pilot drill for metal hole saws | 1 pc |
| |||
| 038220 | ![]() | Annular cutter bi-metal for metal, 51 mm, SD-5651 Bi-metal hole saw for metal 51 mm | 5 pcs |
| |||
| 038221 | ![]() | Annular cutter bi-metal for metal, 60 mm, SD-5660 Bi-metal hole saw for metal 60 mm | 2 pcs |
| |||
| 012207 | ![]() | Carbide drill bit VK6M 0.90mm twist [shank 2mm] For drilling PCBs on machines. Cutting part diameter 0.9 mm, shank diameter 2 mm. | 26 pcs |
| |||
| 041130 | ![]() | Carbide drill bit VK6M 1.0 mm center drill [4 mm shank] Double-ended center drill. Shank diameter 4 mm. Material - VK6M. Drilling diameter 1 mm. | 4 pcs |
| |||
| 012209 | ![]() | Carbide drill bit VK6M 1.10mm twist [shank 2mm] For drilling PCBs on machines. Cutting part diameter 1.1 mm, shank diameter 2 mm. | 32 pcs |
| |||
| 014256 | ![]() | Carbide drill bit VK6M 1.10mm center drill [shank 3mm] Double-ended center drill. Shank diameter 3 mm. Material - VK6M. | 9 pcs |
| |||
| 016132 | ![]() | Carbide drill bit VK6M 1.10mm center drill [4mm shank] Double-ended center drill. Shank diameter 4 mm. Material - VK6M. | 15 pcs |
| |||
| 011890 | ![]() | Carbide drill bit VK6M 1.20mm twist [shank 2mm] For drilling PCBs on machines. Working part diameter 1.2 mm, shank diameter 2 mm. | 16 pcs |
| |||
| 012210 | ![]() | Carbide drill bit VK6M 1.30 mm twist [2 mm shank] For drilling PCBs on machines. Working part diameter 1.3 mm, shank diameter 2.0 mm. | 31 pcs |
| |||
| 045488 | ![]() | Carbide drill bit VK6M 1.30mm twist [shank 3mm] | 24 pcs |
| |||
| 011888 | ![]() | Carbide drill bit VK6M 1.00mm twist [shank 2mm] For drilling PCBs on machines. Working part diameter 1.0 mm, shank diameter 2 mm. | 14 pcs |
| |||
| 011891 | ![]() | Carbide drill bit VK6M 1.40mm twist [shank 2mm] For drilling PCBs on machines. Working part diameter 1.4 mm, shank diameter 2.0 mm. | 50 pcs |
| |||
| 044073 | ![]() | Carbide drill bit VK6M 1.40 mm center drill [shank 2 mm] Double-ended center drill. Shank diameter 2 mm. Material - VK6M. Drilling diameter 1.4 mm. | 5 pcs |
| |||
| 014257 | ![]() | Carbide drill bit VK6M 1.40mm center drill [3mm shank] Double-ended center drill. Shank diameter 3 mm. Material - VK6M. | 9 pcs |
| |||
| 011892 | ![]() | Carbide drill bit VK6M 1.50 mm twist [2 mm shank] For drilling PCBs on machines. Cutting part diameter 1.5 mm, shank diameter 2.0 mm. | 28 pcs |
| |||
| 044081 | ![]() | Carbide drill bit VK6M 1.55mm twist [shank 2mm] For drilling PCBs on machines. Cutting part diameter 1.55 mm, shank diameter 2.0 mm. | 8 pcs |
| |||
| 012211 | ![]() | Carbide drill bit VK6M 1.60mm twist [shank 2mm] For drilling PCBs on machines. Working part diameter 1.6 mm, shank diameter 2.0 mm. | 62 pcs |
| |||
| 012212 | ![]() | Carbide drill bit VK6M 1.70mm twist [2mm shank] For drilling PCBs on machines. Working part diameter 1.7 mm, shank diameter 2.0 mm. | 28 pcs |
| |||
| 053096 | ![]() | Сверло твердосплавное ВК6М 1,70мм спиральное [хвостовик 3мм] | 12 pcs |
| |||
| 012203 | ![]() | Carbide drill bit VK6M 1.75mm twist [shank 3mm] For drilling PCBs on machines. Working part diameter 1.75 mm, shank diameter 3.0 mm. | 40 pcs |
| |||
| 012213 | ![]() | Carbide drill bit VK6M 1.80mm twist [shank 2mm] For drilling PCBs on machines. Working part diameter 1.8 mm, shank diameter 2.0 mm. | 69 pcs |
| |||
| 012214 | ![]() | Carbide drill bit VK6M 1.90mm twist [2mm shank] For drilling PCBs on machines. Working part diameter 1.9 mm, shank diameter 2.0 mm. | 78 pcs |
| |||
| 028332 | ![]() | Carbide drill bit VK6M 1.90 mm center drill [shank 3 mm] | 1 pc |
| |||
| 012215 | ![]() | Carbide drill bit VK6M 2.00mm twist [2mm shank] For drilling PCBs on machines. Working part diameter 2.0 mm, shank diameter 2.0 mm. | 27 pcs |
| |||
| 012205 | ![]() | Carbide drill bit VK6M 2.15 mm twist [3 mm shank] For drilling PCBs on machines. Working part diameter 2.15 mm, shank diameter 3.0 mm. | 10 pcs |
| |||
| 033312 | ![]() | Tap wrench M3-M12, SD-8401 Tap wrench M3-M12 | 1 pc |
| |||
| 033313 | ![]() | Die stock 20*5 mm SD-8411 Die stock 20*5mm | 3 pcs |
| |||
| 040787 | ![]() | Die M 1.2(0.25) d12 right-hand Die for cutting right-hand metric thread M1.2 with 0.25 mm pitch. | 1 pc |
| |||
| 033011 | ![]() | Die M 1.4(0.3) d12 right-hand USSR Die for cutting right-hand metric thread M1.4 with 0.3 mm pitch. | 11 pcs |
| |||
| 033012 | ![]() | Die M 1.6(0.35) d12 right-hand USSR Die for cutting right-hand metric thread M1.6 with 0.35 mm pitch. | 15 pcs |
| |||
| 049802 | ![]() | Die M 1.7(0.25) d12 right-hand USSR Die for cutting right-hand metric thread M1.7 with 0.25 mm pitch. | 10 pcs |
| |||
| 049803 | ![]() | Die M 1.7(0.35) d12 right-hand USSR Die for cutting right-hand metric thread M1.7 with 0.35 mm pitch. | 9 pcs |
| |||
| 033013 | ![]() | Die M 1.8(0.35) d12 right-hand USSR Die for cutting right-hand metric thread M1.8 with 0.35 mm pitch. | 8 pcs |
| |||
| 040788 | ![]() | Die M 2(0.25) d=12 mm right-hand Die for cutting right-hand metric thread M2 with 0.25 mm pitch. | 5 pcs |
| |||
| 034537 | ![]() | Die M 2(0.4) d=12 mm right-hand, USSR Die for cutting right-hand metric thread M2 with a 0.4 mm pitch. | 1 pc |
| |||
| 049806 | ![]() | Die M 2.0(0.25) d16 right-hand USSR Die for cutting right-hand metric thread M2 with 0.25 mm pitch. | 7 pcs |
| |||
| 052518 | ![]() | Die M 2.5(0.45) d12 right-hand USSR Die for cutting right-hand metric thread M2.5 with 0.45 mm pitch. | 19 pcs |
| |||
| 028139 | ![]() | Die M 2.5(0.45) d16 right-hand, USSR Die for cutting right-hand metric thread M2.5 with 0.45 mm pitch. | 5 pcs |
| |||
| 049804 | ![]() | Die M 2.6(0.45) d12 right-hand USSR Die for cutting right-hand metric thread M2.6 with 0.45 mm pitch. | 10 pcs |
| |||
| 049805 | ![]() | Die M 2.6(0.45) d16 LEFT-HAND USSR Die for cutting LEFT-hand metric thread M2.6 with 0.45 mm pitch. | 10 pcs |
| |||
| 050762 | ![]() | Die M 3(0.5) d16 right-hand USSR Die for cutting right-hand metric thread M3 with 0.5 mm pitch. | 18 pcs |
| |||
| 050761 | ![]() | Die M 3(0.5) d20 right-hand USSR Die for cutting right-hand metric thread M3 with 0.5 mm pitch. | 17 pcs |
|




















![Carbide drill bit VK6M 1.0 mm center drill [4 mm shank]](/files/pic/sverlo/bk6m-s.jpg)
![Carbide drill bit VK6M 1.30mm twist [shank 3mm]](/img/no-img-1.gif)


