Twist drill with cylindrical shank for drilling fiberglass PCBs and machining other highly abrasive and hard materials (ceramics, glass, cast iron, hardened steel, etc.). Designed for high-speed CNC machines. Can be used in ordinary drill presses, but a collet chuck is needed to hold the bit. This is due to the high brittleness of the drill material - VK6M alloy. These drills are also not recommended for hand drills; they will break quickly.
Reference information:
VK6M is a fine-grained tungsten-cobalt alloy containing 94% tungsten carbide and 6% cobalt. It is made from relatively coarse tungsten powder obtained by two-stage reduction of tungsten anhydride, with elevated temperature in the first reduction stage. The fine-grained structure of VK6M is obtained by intensive wet milling of the mixture and subsequent sintering of the pressed parts at a lower temperature. As thorough research at VNIITS and production tests at engineering plants have shown, this technology gives VK6M high wear resistance with very low porosity and a static strength equal to that of the standard medium-grained VK6 alloy. Abroad (Germany, Sweden, Austria, etc.) a fine-grained VK6-type alloy is produced under the HI grade. According to catalog data, this grade is intended for machining especially hard materials, including white cast iron, stainless steels and a number of other highly abrasive materials.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown