Photoresist film for the manufacture of printed circuit boards, photolithography, glass matting.
Well displayed (changes color) after exposure.
Manifestation and removal of residues after etching - in moderately alkaline solutions.
excellent adhesion and resolution
high resolution for fine pitch boards
excellent stability of the sidewall profile with a small foot
suitable for alkaline etching
does not cause contamination of the galvanic process
excellent removability due to small particle size
good stability after lamination and exposure
width: 310 mm
length: 1 meter
thickness: 40 microns
The sheet is rolled up and packed in a cardboard tube.
Such packaging protects against lightning, protects against mechanical damage during transportation and storage.
The photoresist cannot be returned or exchanged!
Attention! Due to storage conditions, transporting the photoresist at temperatures below freezing can damage the resistive layer. Please consider this feature when ordering a photoresist in winter, when the order is expected to be delivered by transport agencies.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав