Indispensable when high etching precision is required, for fine-pitch board traces.
Provides uniform etching, no "undercutting". Much more effective than ferric chloride.
Fine crystalline powder, chemically pure (CP).
Packaging: bag 100 g
Directions: dissolve the contents of the package (100 grams) in 0.5l of water at 50°C. Etching is recommended at a solution temperature of about 40°C (maximum at 50°C).
Application reviews :
1. Copper etching capacity is 40% higher than that of the same mass of ferric chloride (approximately).
2. Etching time is 30% longer than with ferric chloride.
3. Works very well on fine details and traces without eating them away.
4. Less aggressive to the PCB solder mask.
5. Does not leave stains on clothing, washes off easily. Chemical glassware is easily cleaned of the solution.
Attention!
Take precautions when working with the product! Avoid contact with eyes, work in rubber gloves and safety goggles, do not store near flammable materials. Hygroscopic, keep tightly closed.
If the solution gets into the eyes, rinse with running water and see a doctor.