Trimmer resistor 10K 3296W is a trimmer resistor of the 3296W series for setting up a circuit during adjustment and calibration. Nominal resistance: 10 kΩ, tolerance ±10%. Power rating: 0.5 W, maximum working voltage: 300 V. Resistance taper: linear. Mounting: through-hole.
Trimmer resistors are designed for occasional adjustment and are not intended for continuous rotation like control potentiometers.
Key specifications:
Series (form factor): 3296W
Nominal resistance: 10 kΩ
Rated tolerance: ±10%
Dissipated power: 0.5 W
Operating temperature: -55°C ... +125°C
Resistor type: Ceramic
Lead mounting method: Through-hole
Mechanical mounting method: Through-hole solder
Maximum working voltage: 300 V
Number of channels: 1
Resistor characteristic: Linear
Rotation angle: 10800°
Switch: no
Shaft type: Cylindrical
Shaft orientation: Vertical
Shaft length: 1.5 mm
Shaft diameter: 2.2 mm
Shaft material: Metal
Thread: Not
Marking: 103
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений ЗП
unknown