Indispensable when high etching precision is required, with fine PCB trace pitch.
Provides uniform etching, no "undercutting". Much more effective than ferric chloride.
Fine crystalline powder, chemically pure (CP).
Packaging: 1 kg bag
Directions: dissolve the package contents (1000 grams) in 5 l of water at 50°C. Etching is recommended at a solution temperature of about 40°C (max. 50°C).
Application reviews :
1. Copper etching capacity is 40% higher than that of the same mass of ferric chloride (approximately).
2. Etching time is 30% longer than with ferric chloride.
3. Works very well on fine details and traces without eating them away.
4. Less aggressive to the PCB solder mask.
5. Leaves no stains on clothing and washes off easily. Chemical glassware is easily washed clean of the solution.
Attention!
Take precautions when working with the product! Avoid contact with eyes, work in rubber gloves and safety goggles, do not store near flammable materials. Hygroscopic, keep tightly closed.
In case of contact with eyes, rinse with running water and consult a doctor.