Twist drill with cylindrical shank for drilling fiberglass PCBs and machining other highly abrasive and hard materials (ceramics, glass, cast iron, hardened steel, etc.).
Designed for high-speed CNC machines. Can be used in ordinary drill presses, but a collet chuck is needed to hold the bit.
This is due to the high brittleness of the drill material - VK6M alloy.
These drills are also not recommended for hand drills; they will break quickly.
Reference information:
VK6M is a fine-grained tungsten-cobalt alloy containing 94% tungsten carbide and 6% cobalt. It is made from relatively coarse tungsten powder obtained by two-stage reduction of tungsten anhydride, with elevated temperature in the first reduction stage. The fine-grained structure of VK6M is obtained by intensive wet milling of the mixture and subsequent sintering of the pressed parts at a lower temperature. As thorough research at VNIITS and production tests at engineering plants have shown, this technology gives VK6M high wear resistance with very low porosity and a static strength equal to that of the standard medium-grained VK6 alloy. Abroad (Germany, Sweden, Austria, etc.) a fine-grained VK6-type alloy is produced under the HI grade. According to catalog data, this grade is intended for machining especially hard materials, including white cast iron, stainless steels and a number of other highly abrasive materials.