ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Development toolsModulesRemote control modules
Код товара:
042294

Remote control with receiver radio 1 channel power supply 12V Ver.3

Remote control kit.
Remote control+relay. Switching current up to 10A .
Remote control with receiver  radio 1 channel power supply 12V Ver.3
NOT available.
Expected price: 285,60 UAH
from 1 pc : 285,60 UAH
from 5 pcs : 271,30 UAH ( -5,0%)
from 20 pcs : 257,00 UAH ( -10,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

Ready set of radio relays is designed for remote switching of electrical circuits with currents up to 250V/10A, such as gates, elevators, small heaters, starters, electric locks. Ideal for embedding in a car system, as it can be powered by 12V. Included is a protective box-case with latches.
Pressing the button on the key fob turns on the relay. Since the contacts NC, NO, COM of the switching contact of the relay are output, connecting to the desired contact can both close and open the circuit. The range is up to 50m, indoors up to 15m, depending on the "noise" of the radio and weather conditions.

Key Features:

  • Model: AK-RK01-12
  • Switching current: ≤10A/250V AC , ≤10A/30V DC
  • Supply voltage: DC 9-14V
  • Operating frequency: 315MHz
  • Receiver sensitivity: >-105 dB
  • Number of channels: 1

The receiver module can operate in several modes: momentary, hold and latch.
 
1. Momentary - the relay is switched while the button on the remote control is held down.
Jumper position: no contact closed.
 
2. Hold - the first time you press the button on the remote control, the relay switches. When the same button is pressed a second time, the relay returns to its original position.
Jumper position: 2+3
 
3. Latch - when you press one button on the remote control, the relay switches, when you press another button, the relay goes into its original state. This mode requires an optional multi-button remote control.
Jumper position: 1+2.

To add a remote control, you need to briefly press the button on the module, the LED will go out, and press the button on the remote control. The remote control will remain in memory. Supports multiple remotes at the same time.
To erase all remotes from the device memory, you need to press and hold the button on the module for 10 seconds, the LED will go out, after 10 seconds it will light up, all remotes are erased.
 
You can use remotes with encoders PT2260, eV1527 and their analogues.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…