Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Intelligent charger Xtar VP2 for Li-Ion/LiFePO4 batteries with functions:
- POWER BANK, - charge your gadgets from the XTAR VP2 USB output; - display of battery voltage;
- display of the remaining time of the charging process;
- regulation of the charge rate by means of a switch 250mA/500mA/1000mA
- charge batteries and gadgets at the same time from an external power source.
PowerBank function:
You can use the XTAR VP2 charger as a portable charger for electronic devices that can be charged via the USB connector.
To activate the USB output on the XTAR VP2 charger, you need to insert a Li-Ion battery into the first (left) channel of the charger and press and hold the mode selection button for 1.5 seconds.
You can use both protected and unprotected Li-Ion batteries for use as a PowerBank. The XTAR VP2 charger will prevent over-discharge of batteries by disconnecting the USB output when the voltage on the battery drops below 3V
The discharge indicator informs you about the remaining charge in the battery:
> 50% - green
50-25% - red
<25% - red blinking
Charge the batteries correctly!
Control the amount of charging current using the 250mA/500mA/1000mA switch, selecting the optimal charging mode for your batteries in the XTAR VP2 charger.
Possibility of switching the voltage for rechargeable batteries: 3.2V for LiFePO4, 3.6 and 3.8 for Li-ion batteries.
Informative LCD display
Display of charging current, battery charge level in percent, voltage of the charged battery.
If a damaged battery is installed or if the contacts are short-circuited, the display of the XTAR VP2 charger will show the value "null". In case of polarity reversal, the display will signal with the value "ERR"
Save your money.
The proprietary function XTAR 0V Activation allows you to charge over-discharged Li-Ion batteries (if possible: highly discharged Li-ion batteries cannot be restored)
Automatic shutdown at end of charge
Support for a huge number of battery sizes: 10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/22650/25500/26650/32650 3.6V/3.7V Li-ion/IMR/INR/ICR and LiFePO4.
XTAR VP2 SPECIFICATIONS
manufacturer
Xtar
charger model
VP2
rechargeable battery types
1-2 batteries Li-ion 3.6 - 3.8V and LiFePO4, protected and without protection
LCD display, activation of highly discharged batteries, the ability to change the charge current and control the voltage of the batteries,
POWER BANK function
protection
from overheating, short circuit, from incorrect battery polarity
dimensions
135 x 68 x 35mm
weight
125g
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown