The board allows prototyping of various electronic circuits easily and without soldering, and is reusable.
Resource - 10,000 component installations.
It is used for mounting accessories with hard leads with a diameter of 0.3-0.8 mm.
Contact material: phosphor bronze, nickel.
The board consists of 6 blocks of the main field, interconnected by grooves of 600 contact points each with integrated power buses on the 1st bus for 50 points on both sides of each block.
In addition, the power bus in the amount of 1 piece per 100 points is located along the upper edge of the main field.
The contact field is fixed on a dielectric base plate.
There are two pairs of power clamps on the top of the base (two clamps each, red and black). Contacts for connecting the clamps are made for soldering, brought out to the bottom side of the boards through the base.
On the underside of the board there are rubber feet on a screw fastening, if necessary, it can be easily removed.
Characteristics:
-
board size: 300 x 230 x 12 mm (excluding rubber feet)
-
number of contact points of the main field: 3600 pcs (6 blocks, 60 x 5 x 2 contacts)
-
number of power bus contacts: 700 pcs (14 pcs, 5 x 10 contacts)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
