Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Solder joint remover.
During operation, it is necessary to periodically remove the piston, clean the inner cavity of the cylinder from the remnants of solder and flux, lubricate the piston O-ring with grease.
When replacingtipit is necessary to wind up the thread with FUM plumbing tape in order to exclude air leakage along the thread.
Attention!do not leave the solder suction switched on for a long time! with prolonged heating without work, the seal between the pump part and the heater overheats, the rubber ring dries up, the tightness of the connection is broken. The gasket can be repaired with a high-temperature automotive silicone sealant, or it can be completely formed from such a sealant.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
![Solder suction ZD-211 [with heater 220V, 40W]](/files/pic/proskit/soldering/zd-211-s.jpg)
![Solder suction ZD-211 [with heater 220V, 40W]](/files/pic/proskit/soldering/zd-211.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
