UT203+ clamp meter made by UNI-T.
Automatic range selection (except current measurement modes) and auto power-off mode.
Measurement method: True RMS.
Features non-contact voltage detection (NCV).
Maximum cable diameter for the clamp meter jaws 28 mm.
Display type - LCD, count - 3999, display update 3 times per second.
Measurement functions:
- DC and AC voltage (contact method, via test probes)
- DC and AC current (non-contact method)
- frequency
- duty cycle
- continuity test (audible indication)
- diode test (p-n junction check
Measurement range selection - automatic.
Additional functions:
- display reading hold (Data Hold)
- relative mode
- sleep mode (auto power-off after a long period without measurements)
- low battery indicator
- NCV non-contact AC voltage detection
Measurement ranges:
- DC voltage: 400 mV/ 4 V/ 40 V/ 400 V/ 600 V;
- AC voltage: 4V/ 40V/ 400V/ 600V;
- DC: 40A/ 400A;
- AC: 40A/ 400A;
- resistance: 400Ohm/ 4kOhm/ 40kOhm/ 400kOhm/ 4MOhm/ 40MOhm.
- frequency range: 10 Hz - 1 MHz.
- capacitor capacitance: 40nF - 40000µF.
Power source: AAA batteries, 2 pcs
Dimensions: 210x75.6x30mm.
Display dimensions: 35.6 x 18mm.
Product weight: 200 g.
Complies with electrical safety standards IEC 61010 CAT II 600 V, CAT III 300 V