The SN3350 is a step-down switching converter designed to efficiently drive a single LED or a series-parallel LED string from a supply voltage higher than the LED voltage. It operates from 6 V to 40 V input and sets an output current up to 750 mA with an external resistor.
Depending on supply voltage and external components, the converter can deliver up to 30 W output power.
The SN3350 includes an integrated output switch and a high-side output current sensing circuit that uses an external resistor to set the nominal average current.
The output current can be adjusted linearly by applying an external control signal to the ADJ pin, either a DC voltage or a PWM signal. This provides continuous or pulsed output current control.
Applying 0.2 V or less to the ADJ pin turns off the converter and puts the driver into low-power standby.
The IC comes in SOT23-5 and SOT89-5 packages. SOT23-5 is for output currents up to 350 mA, SOT89-5 for up to 700 mA.
Features:
few external components;
internal 40 V integrated output switch;
wide input voltage range: from 6 V to 40 V;
output current up to 700 mA (SOT89-5 package);
high efficiency (up to 95 %);
typical dimming range 1200:1;
typical output current accuracy 5%;
a single input for on/off and brightness control using DC voltage or a PWM signal;
switching frequency 1 MHz;
protection against open or disconnected LED;
thermal overheating protection;
two packages for different maximum currents.
Applications.
Low-voltage LED light sources.
Automotive lighting.
Low-voltage industrial lighting.
Illuminated signs
Regulator board
buy