Analog Micro Servo 3.7gram
Application area:
Radio controlled toys - Helicopters, robots, cars, boats, toys, mini drives, etc.
Weight: 3.7 grams
Size: 19.8x8.6x21.8mm
Speed (4.8 V no load): 0.1 sec/60 degrees
4.8V Torque: 0.7kg-cm/9.71oz-in
6.0V Torque: 0.8kg-cm/11.1oz-in
Voltage: 4.8 ... 6V
Load current: <300 mA
Temperature range: -30 to +60 degrees C
Cable length: 150mm
Body color: Blue
Servo rotation setting
Since this servo does not have a continuous rotation servo, it operates in the right-stop-left rotation mode. The principle of operation differs from the usual one, since there is no feedback in it. A command to rotate 180°(servo.write (180)) will rotate in one direction, when a command to rotate to 0°(servo.write (0)), rotation in the other direction, and when a command is rotated to 90°(servo.write (90)) - stop.
To set the "stopping angle", it is necessary to give a command to the servo drive to rotate 90°and by turning the trimmer located at the bottom of the case, the motor will stop.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
