Logic analyzer DX-PRO

Изображение товара

Product description format_size zoom_out zoom_in

---

What is the difference between the DX-Pro and AX-Pro analyzers?

• The AX-Pro is a single-channel, two-input, alternate display of channel signals; USBee DX independent channels, two signals can be displayed at the same time.
• AX-Pro 8 - digital channels, Pro DX-16 digital channels.
• AX-Pro maximum analog channel sampling rate 16Msps, DX-Pro for 24Msps.
• AX-Pro allows you to observe analog signals up to 8 MHz, DX-Pro - up to 20 MHz.

---

Specifications:

Parameter name	Parameter
Power supply	USB interface, power supply, 5V 150mA
Communication interface	USB 2.0 high speed, 480bps
Pin assignment	Interface specifications: 26P double pin, 2.54mm pitch CH1, CH2: 2-channel analog input AGND: analog ground D0 ~ ~ DF: 16 ​​digital inputs or 16 digital outputs TRIG: external sync input or I/O port CLK: ADC clock output clock DAC: analog output 5.0V: 5V output (USB port 5V power supply) GND: digital ground
Operating temperature range	-20 ℃ to 85 ℃
Working environment humidity	Maximum 90%
Dimensions (edit)	100mm x 53mm x 28mm (without cable)
The weight	80g (without cable)
Supported operating systems	Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64
Oscilloscope
Oscilloscope	Dual channel
Oscilloscope maximum sampling rate	Mode - Single channel24Msps; two-channel12Msps Note: The maximum speed is related to the PC's USB hardware interface, operating system and driver software
Bandwidth	8MHz(Note: bandwidth of the interface analog circuits20MHz,measuring signals by frequency8MHz)
Oscilloscope input impedance	1MΩ/30pF
Analog input voltage range	Open input: -10V to +10V; Maximum voltage: -20V ~ ~+20 V Installing DX adapter board, the input voltage range can be increased to -100V ~ +100V Standard oscilloscope probe, with X10 divider, can extend range to -100V ~ +100V
Oscilloscope vertical resolution	8 bit, 256 points
Oscilloscope sensitivity	78 mV
Oscilloscope sampling depth	More than 200 thousand samples, determined by the size of the computer memory, usually up to 300MB.
Oscilloscope cab voltage	6 points, 100mV/div ~ 5V/div
Oscilloscope cockpit time	23 points, 100 ns/div ~ 2s/div
Trigger mode	Normal start, automatic movement, analog voltage, digital signal
Analog trigger voltage	-10V to +10 V
Trigger positions	10% to 90%
Waveform measurement functions	Vertical cursor, horizontal cursor, maximum, minimum, difference, difference between inverse frequency, period
Waveform Zoom in	Support for left and right keys to control, support the mouse wheel to enlarge
File function	Opening, saving a waveform
Reference signal	Reference signal comparisons can be set
Logic analyzer
Digital channels	16 channels
Digital signal low	<0.8V
Digital signal high	> 1.4V
Digital input voltage range	Work properly: 0 to 5.5 V; Maximum voltage: 5V to 10V
Maximum digital sampling rate	24Msps. Note: The maximum speed is related to the PC's USB hardware interface, operating system and driver software
Trigger mode	Rising edge, trailing edge, automatic start
Supported protocols	I2C, SPI, Asynchronous Serial, 1-Wire, I2S, CAN, USB Low Speed,USB Full-Speed, the user's own protocol
Waveform measurement functions	Vertical cursor, horizontal cursor, time difference, mutual difference, frequency, period
Waveform Zoom in	Support for left and right keys to control, support the mouse wheel to enlarge
File function	Open save signal data, save save bus decoding data
Signal generator
Number of digital output channels	16 channels
Maximum sampling rate	8 channels 24Msps; 16 channel 12Msps
Number of measurements	Min 1M to Machine Memory Ceiling PC
Control current of output channels	4 mA
Output signal level - low	Less than 0.8 is actually close to 0V
Output Level - High	More than 2.4 is actually close to 3.3
Loop output	Support
External trigger signal	Support
Data logger
Number of digital channels	16 channels
Number of analog channels	2 channels
Sampling rate	500 ms to 300 s
Digital voltmeter
Analog channels	2 entrances
Analog input voltage range	-10V ~ +10 V
Minimum measurement resolution	78 mV
Analog Resolution	256 levels
Update frequency	3 measurements per second
Frequency counter
Measuring digital channels	8 - channel or 16 - channel
Measurement frequency range	8 channels from 0 to 12 MHz; 16 - channel from 0 to 6 MHz
Input voltage range	Work properly: 0 to 5.5 V; Maximum voltage: 5V to 10V
Resolution	1Hz
Measurement time	1 second
Remote controller
Digital control channels	16 outputs
Analog control channels	0
Control mechanisms	Toggle button
Output signal level - low	<0.8V
Output Level - High	> 2.4V
Output impedance	100 ohm
Output current	4 mA
PWM controller
Digital control channels	16 months
Analog control channels	0
Resolution	256 bit
PWM frequency	1.02 KHz
Control mode	Engine for each channel
Control current of output channels	4 mA
Low output level	<0.8V
High output level	> 2.4V
Signal generator
Digital control channels	8 bit
Analog control channels	0
Number of group frequencies	6
The first group of frequencies	1 MHz, 500 kHz, 250 kHz, 125 kHz 62.5kHz, 31.25kHz, 15.625KHz, 7.8125kHz
Second group of frequencies	32 kHz, 16 kHz, 8 kHz, 4 kHz, 2 kHz, 1 kHz, 500 Hz, 250 Hz
The third group of frequencies	750kHz, 375kHz, 187.5kHz, 93.75kHz, 46.875kHz, 23.4375kHz, 11.1875kHz, 5.5893kHz
Fourth group of frequencies	19.2kHz, 9600Hz, 4800Hz, 2400Hz, 1200 Hz, 600 Hz, 300 Hz, 150 Hz
Fifth frequency group	64 Hz, 32 Hz, 16 Hz, 8 Hz, 4 Hz, 2 Hz, 1 Hz, 0.5 Hz
Sixth frequency group	1920Hz, 960Hz, 480Hz, 240Hz, 120Hz, 60Hz, 30Hz, 15Hz
Control current of output channels	4 mA
Output signal level - low	<0.8V
Output Level - High	> 2.4V
I2C controller
I2C clock frequency	Average 2.2KHz
I2C control mode	Scripting language text format
I2C script commands	Start, Stop, Ack, KnowAck, Read, Write data
Script Editor function	Cut, copy, paste, save, open, new
Output file format	Text files (including read data Ack state)
Drive current output channel	4 mA
Output signal level - low	<0.8V
Output Level - High	Open drain output (external resistor required)
Pulse counter
Measurable digital channels	16 inputs
Measurable analog channels	0
Minimum pulse width of the measurement signal	83.3nS
Control functions	reset, start, stop

DX-Pro digital input ports can analyze TTL and CMOS level signals. The physical RS232, RS485 and CAN bus signal levels are outside the scope of the DX-Pro.

Specially designed for DX-Proadapterfor matching with signals of interfaces RS232, RS485, CAN.

---

USBee DX Data Logger - Data logger.
Allows you to record data on 16 digital and 2 analog channels. Discreteness of measurements is set 500ms to 300sec.


 

---

USBee DX Digital Signal Generator is a digital signal generator.
Allows you to create complex sequences for checking and testing microprocessor technology.


 

---

USBee DX Digital Voltmeter Digital two-channel voltmeter.
Allows to measure voltage in the range -10V ~ +10 V, with a frequency of 3 measurements per second.


 

---

USBee DX Frequency Counter - 16 channel frequency counter.
Allows you to simultaneously measure and record the frequency of 16 channels.


 

---

USBee DX Frequency Generator - 8 channel fixed frequency generator.
Allows you to quickly form a meander at the output with fixed frequencies.

  
 

---

USBee DX I2C Controller - Controlled controller via I2C bus.
Allows you to create simulated devices.


 

---

USBee DX Logic Analyzer and Oscilloscope - 16 channel logic analyzer and dual channel oscilloscope.
The software allows you to configure all kinds of work options from a simple single-channel oscilloscope to combined modes.



Setting options:
One analog - 8 digital



Only - 8 digital channels analyzer



Only - two-channel oscillograph.



Single channel oscilloscope.



16 channel analyzer+2 channel oscilloscope.


 

---

USBee DX Pulse Counter - pulse counter.
16 channel counter of impulses.


 

---

USBee DX Pulse Width Modulator is a 16 channel PWM controller.
allows you to control independently the duration of the pulses on 16 channels.


 

---

USBee DX Remote Controller is a USB controlled controller.
Allows you to control the logic output levels.


 

---

Contents of delivery: