The MCP2200 is a USB-to-UART converter for applications that need to communicate with a PC over a UART serial interface. Minimal external components thanks to integrated USB resistors. The MCP2200 also has 256 bytes of integrated user EEPROM. The MCP2200 has eight general purpose I/Os. Four pins have alternate functions to indicate link status.
Universal Serial Bus (USB), Universal Asynchronous Receiver/Transmitter (UART), EEPROM, Other
Supports Full-Speed USB (12 Mb/s)
Implements USB Protocol Composite Device CDC Device (communications and control).
Class 02h - CDC: USB-to-UART communications and I/O control
Class 03h - HID: I/O control, EEPROM access, and initial configuration
128 byte buffer to handle data throughput at any UART baud rate.
64 byte transmit
64 byte receive
Fully configurable VID and PID assignments, and string descriptors
Bus Powered or self powered USB Driver and Software Support
Royalty-free drivers for Virtual Com Port (VCP)
Windows XP(SP2 and later)/Vista/7
Configuration utility for initial configuration
Support baud rates: 300 - 1000k (baud)
Hardware flow control
UART signal polarity option General Purpose Input/Output (GPIO) Pins
Eight (8) general purpose I/O pins
256 bytes of user EEPROM
USB activity LED outputs (TxLED and RxLED)
SSPND output pin
ULOAD output pin (indicates if requested current was allowed).
Operating voltage: 3.0 - 5.5 (V)
Oscillator input: 12 MHz
ESD protection > 4kV HBM
Industrial (I) Operating Temperature: -40°C to +85°C
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений ЗП
unknown