The multimeter allows you to measure the following parameters:
- direct and alternating current (up to 10 A)
- DC and AC voltage
- resistance
- capacity
- frequency
- temperature
Also available:
-
audible chain ringing,
-
pn junction testing (diode test),
-
testing transistors.
-
true rms reading ( Thrue RMS)
-
protective fuse at the limit of 10 A
-
4-20mA current loop
Ease of use will be ensured by the following functions:
-
"Data Hold"
-
Auto range switching;
-
Manual and automatic switching of measuring ranges;
-
Peak value indication;
-
automatic power off in the absence of measurements for 15 minutes ("sleep mode").
-
Analogue bar on the indicator
-
A low battery level indication (7.5 V) is provided to monitor the state of the battery.
-
A cover made of elastic plastic around the perimeter of the device protects it from mechanical damage.
-
When the measurement modes are selected, the corresponding sockets for connecting measuring probes are indicated on the indicator of the device.
Display: LCD, 63 x 31 mm, maximum bit depth - 3999 (AC) 39999 (DC);
Direct voltage (DC), V : 4 V/40 V/400 V/1000 V accuracy ±(0.1%+5)
Alternating voltage (AC), V: 4 V/40 V/400 V/750 V accuracy ±(1%+4)
Direct current (DC), A: 400 μA/4 mA/40 mA/400 mA/10 A accuracy ±(0.5%+10)
Alternating current (AC), A: 400 μA/4 mA/40 mA/400 mA/10 A accuracy ±(1.2%+10)
Resistance, Ohm: 400 Ohm/4 kOhm/40 kOhm/4 Mohm/40 Mohm Accuracy ±(0.8%+10)
Capacitance, F: 40nF/400nF/4μF/40μF accuracy ±(1.5%+20)
Frequency, Hz: 4 kHz/40 kHz/400 kHz/4 MHz/40 MHz/400 MHz accuracy ±(0.01%+5)
Temperature: 40
o C ~ 400
o C
Sampling rate: 2-3 times/second
Power supply: 9V Krona battery
Dimensions: 177 x 85 x 40 mm
Weight: 320 grams.
Accessories included: measuring probes, battery, manual, thermocouple (open junction, ball), crocodile clips.
Инструкция по эксплуатации на английском языке
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
