Cautery on wood ZD-8905

Product picture

Product description format_size zoom_out zoom_in

The burner is used for finishing and painting wood, cork and leather surfaces, for working on fabrics, cardboard, expanded polystyrene and other materials.
Leverpyrograph of a convenient form with a power button (push button without fixing).
Smooth temperature control in the range from 450°С to 750°С.
The temperature is controlled by varying the output voltage applied to the sting heater (wire loop). The regulator is triac, the output voltage is limited within 0.8V - 1.7V.
The tip is secured in the holder with two slotted screwdriver pins.

The updated modification addedsafety function- the tip heats up only when the button on the burner handle is pressed. Since the sting is a wire loop, its mass is minimal, it cools down very quickly. If left unattended, the burner will have a cold sting. This is a fundamental difference from other models of burners.
This safety function is especially relevant when children are drawing with a burner.
Mode of operation: intermittent. The duration of the switch-on pulse should not exceed 30 seconds. The interval between the switching on pulses must also be up to 30 seconds (the longer the switching on was, the longer the cooling time must be).

Pyrograph - as the burner is also called - a wonderful gift for children and adults, for art lovers and professionals!

Characteristics:

• power supply voltage: 220V
• power: 40W
• output voltage: 0.8V ~ 1.7V
• tip temperature: 450°C ~ 750°C.