ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Tools and equipmentPower toolsMicro drills, engraving machines
Код товара:
021327

Hanging engraving machine MR3106 (220V, 270W, 20k)

Hanging engraving machine, power 270 W, revolutions up to 20 thousand rpm. Reinforced shaft with chuck. For engraving on hard materials. Pedal control.
Hanging engraving machine  MR3106 (220V, 270W, 20k)
NOT available.
Expected price: 2 604,00 UAH
from 1 pc : 2 604,00 UAH
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

Hanging type engraving machine is designed for processing various materials with cutters and abrasive attachments.
The shaft end is equipped with a chuck, clamped with a wrench.
Switching on and adjusting the engine speed is carried out by a pedal.
A suspension bracket is installed on the motor housing.
Shaft end housing - aluminum. Such a tip can withstand loads when engraving on stone, on various hard metals (steel, brass, bronze, cast iron). The tip is easily detached from the shaft for servicing. It is necessary to periodically remove the flexible shaft from the casing, remove the remnants of the old grease and put in a new one, this will significantly extend the shaft life, and also reduce the load on the engine.

Attention! Hang the engraving motor in such a position to avoid strong shaft bends. Bending of the shaft with a small radius leads to overloading of the motor, lowering the maximum speed, overheating and increased wear of the shaft and the motor itself.
The flexible shaft should be lubricated periodically by putting grease in the shaft outer casing.
Completeness :
  • outboard engine
  • flexible shaft with chuck
  • foot pedal
  • spare collector brushes
Features:
  • maximum power: 270 W
  • idle speed (no load), max: 20,000 rpm
  • supply voltage: 230 V, 50 Hz
  • chuck: 0.3-4 mm
  • weight: 2.7 kg

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown