This modification of the soldering iron is equipped with a remote thyristor temperature controller in the form of a separate block on the power cord. Despite the absence of a temperature sensor, and, accordingly, the feedback of the regulator, the possibility of adjustment allows you to avoid overheating of the soldering iron, failure of the heater and accelerated wear of the tip (burnout of the protective chrome coating).
A distinctive feature of the soldering iron is the compatibility of the design of the heating element and the tip (tip) with the design of the soldering irons used in the most popular soldering stations. These are 900M series blades, or as they are also called in another way - HAKKO blades.
It is the prevalence of these soldering tips that is an indisputable advantage. You can always purchase a tip of the required configuration, and for those who have a soldering station with an already formed set of tips, this soldering iron will be a good addition to the station when soldering work away from the workplace.
Just like in soldering stations, changing the soldering tip takes a few seconds.
The neon lamp installed in the handle of the soldering iron will once again prevent you from forgetting the soldering iron on.
Ergonomic handle for comfortable work.
Packaging in the form of a pencil case made of sheet transparent plastic provokes a gift - to yourself or to a friend. Initially, in the factory configuration, a needle-shaped tip with a tip of 0.8 mm in diameter (i.e. a cone of 0.8 mm) is installed on the soldering iron.
Such a sting has a low heat capacity and is not suitable for all types of work. It is recommended to choose a set of interchangeable tips based on the types of work to be done. You can choose the tips from this section of the catalog: http://voron.ua/catalog/007551
Attention!
Due to the high dynamics of heating, it is not recommended to operate the soldering iron with the maximum temperature of the heater, i.e. in the extreme right position of the voltage regulator knob, especially when a small mass (thin) tip is installed. This will avoid overheating of the soldering iron, thereby ensuring high-quality soldering, a long service life of the tip and heater.
The warranty period for a soldering iron with a regulator is 1 month from the date of sale. The tip and heating element of the soldering iron are consumable items, not covered by the warranty .
All soldering irons are 100% pre-tested.