Aluminum handle with deep grooves in the area of coverage.
A collet is installed at the bottom end of the handle for fixing the tips. The collet is steel, the clamping nut is also steel, nickel-plated.
Hexagonal tips, two-sided. They can be fixed in the handle at different lengths. The maximum working length is 80 mm, the minimum is 27 mm.
The blade diameter of the tip of the central part is 4.5 mm. This must be taken into account when working with screws deeply recessed into the housings.
The collet handle can also be used as a universal handle for other tools. You can clamp the awl needle, drill, etc. into the collet.
The upper end of the handle with a rotating stop. Steel tips, nickel-plated, with a round blade.
Plastic packaging - a pencil case with a removable lid, later can be used to store the set.
Handle color - in assortment.
handle length: 100 mm
handle diameter: 12 mm
tip length: 80/27 mm
tip working length: 8 mm
Tip composition:
-
torx T2
-
torx T3
-
torx T4
-
torx T5
-
torx T6
-
cross +1.2 mm
-
cross +1.8 mm
-
Y- type Y2.0 mm
-
five-point sprocket 0.8 mm
-
slot -2.0 mm
Completeness:
-
handle - 1 piece
-
double-sided tips - 5 pcs
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
