У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Optical-mechanical tachometer DT-2236B IR sensor and pin
Two ways to measure rotation speed - optical and contact. Measurement range non-contact 2.5 rpm up to 100,000 rpm. Mechanically 0.05 ~ 99.99 RPM Infrared sensor.
The mechanical method of measurement is indispensable in the case when only the end of the rotation shaft is available for measurement, or the rotation speed is extremely low.
To measure optically, it is necessary to stick a piece of reflective tape (foil) on the radial surface of the pulley, turn on the device and direct the emitter towards the object.
Mechanical measurement requires the transmission of a rotational force to the instrument shaft. For this, friction nozzles (2 pcs of different diameters, rubber) and a round-section drive belt with a pulley are included with the tachometer.
Specifications:
display: LCD, 5 digits, character height 10mm
optical measurement -
detector type: infrared
speed measurement range: 2.5 ~ 999.9/1000 ~ 99999
resolution: 0.1 prm/1 rpm
measurement accuracy: ±(0.05%+1digit)
distance from device to measuring object: 5cm ~ 60cm
mechanical measurement-
detector type: mechanical
speed measurement range: 0.05 ~ 99.9
resolution: 0.01 prm/0.1 rpm
measurement accuracy: ±(0.05%+1digit)
Functions:
memorizing the maximum/minimum value √
storing readings DataHold √
auto power off √
General Features:
power supply: AA batteries × 4pcs
size: 215 × 72 × 38 mm
weight: 206 g
Accessories:
plastic storage case
reflective tape
friction nozzles - 2 pcs.
pulley and drive belt
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
