ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Development toolsModulesCommunication modules
Код товара:
025399

Bluetooth module SPP-C, analogue of HC-05/НС-06

Bluetooth module v2.1+EDR. UART host interface.

For wireless home automation devices, data transmission ...

Bluetooth module SPP-C, analogue of HC-05/НС-06
NOT available.
Expected price: 92,40 UAH
from 1 pc : 92,40 UAH
from 10 pcs : 83,16 UAH ( -10,0%)
from 100 pcs : 73,92 UAH ( -20,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

SPP-C Bluetooth module is designed for wireless data transmission, version V2.1+EDR Bluetooth. This module supports UART interface as well as SPP Bluetooth protocol.
Low cost, small size, high transmit/receive sensitivity, low power consumption, minimum external components and maximum capabilities.

Main characteristics:
 

  • Bluetooth Chip: BK3231
  • Communication protocol: Bluetooth Specification v2.1+EDR
  • Radius: up to 10 meters (power level 2)
  • Integrated PCB antenna
  • Compatible with all Bluetooth adapters that support SPP
  • Radio frequency: 2.40 .. 2.48 GHz
  • Host Interface: UART
  • Supply voltage: 3.3V
  • Power consumption during data transfer: 40 mA
The module is configured for UART speed - 9600 baud (8 data bits, no parity, stop bit (8N1)); the factory password is 1234. The module can only work in the Slave mode. The power supply of the module is 3.3 V, therefore, when used in conjunction with a 5V data line, a level converter is required. for exampleTXS0108E .

  • TX, RX - UART interface;
  • NC - reserved;
  • P00… P45 - programmable input/output port;
  • RESET - reset line;
  • 3.3 V - power supply;
  • GND - ground.

Submission of AT commands must be accompanied by CRNL characters (they are/r/n, they are also 0x0D 0x0A - carriage return and line feed). The transition to the AT command mode occurs immediately after the module is powered up, and after the module is connected to the Bluetooth device, it already switches to the data transmission mode.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • V12 21:09 11.01.2021 share

    Это именно тот модуль, что изображён на фото? На модуле чип BK3231? Не BK3432? Можно ли привести фото именно того модуля, который сейчас в продаже? Нужны 10 таких модулей.

    Is the review helpful?
    • Денис (Менеджер интернет-магазина) 12:47 13.01.2021 share

      Да, модули такие и чип BK3231.

      Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…