Hollow rivet with a round head. Hollow rivets are used instead of hammer rivets to fasten joints, especially where a non-rigid joint is needed, for example a hinged one.
Advantages of hollow rivets:
reduce the cost of the product
can be used instead of bolts and screws
create permanent joints
if necessary, fastenings made with hollow rivets are not so hard to remove
Brass hollow rivets not only provide corrosion-resistant fastening but also allow electrical contacts to be brought in without drilling extra holes.
Rivet (head) diameter D= 3 mm
Length L= 4 mm
Diameter d= 2 mm
Wall thickness S = 0.25/0.3/0.4 mm
Thickness H = 0.5 mm
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений ЗП
unknown