ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!

Whole catalog Development toolsModulesRobotics and Automation
 Development toolsModulesArduino modules
Product code:

Module 51 AVR 8 12V relays with opto-decoupling

Module - 8 relays with opto-isolation 10A 250V AC.
Power supply 12V. The control signal is logical zero.

Module 51 AVR 8 12V relays with opto-decoupling
In stock
137,50 UAH × = 137,50 UAH
from 1 pc : 137,50 UAH
from 5 pcs : 130,60 UAH ( -5,0%)
from 20 pcs : 123,80 UAH ( -10,0%)

Current balances:

Магазин-Днепр43 pcs
For Online Orders213 pcs
All conditions for the date of shipment and the minimum order amount are specified in the Rules

Product picture

Product description format_size zoom_out zoom_in

High quality 8-channel module. Consists of eight switching relays, each of which can switch current up to 10A at 220 volts AC or DC.
The relay coils are powered from 12 volts DC, which allows it to be used in a car.
Overall dimensions 138x56mm, height with leads 20mm. Distances between the centers of the mounting holes: 132 and 50 mm. Hole diameter 3 mm.

The module contains transistor switches, due to which it can be connected directly to microcontrollers (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic), while providing galvanic isolation from the control circuit. The control signal is logical zero.
Diagram of one channel and pinout of the board:

Оставьте свой отзыв или задайте вопрос

Здесь обсуждается только этот товар. Комментарии не по теме будут удалены! Пожалуйста, соблюдайте Правила комментирования.

Eugene 16-07-2017 22:33 shopping_cartуже купил share

При управлении 5-вольтовым ардуино и питании модуля от автомобильной сети - нужно снимать JMP1 и подавать на JD-VCC +12V, а на VCC +5V?

Денис (Менеджер интернет-магазина) 17-07-2017 9:48 share

1)Снять джампер , дабы разорвать цепь коммутации реле 12В и линии ардуино 5В
2)Питание автомобильной сети 12В подать на JD-VCC
3)Питание от ардуины  5В подать на VCC
4)На GND подать минус питания от 12В.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: View more…