ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Интернет-магазин
УКР РУС ENG
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:
arrow_drop_down
close
search Найти

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog ↠ Development tools ↠ Modules ↠ Accelerometers and gyroscopes

Новинки All New Items...

Recommended All…

Код товара:
029691

Sensor GY-271 HMC5883L

Three-axis digital magnetoresistive compass (three-coordinate magnetometer).
Based on HMC5883L

Sensor GY-271 HMC5883L
NOT available.
Expected price: 186,50 UAH
from 1 pc : — 186,50 UAH
from 5 pcs : — 177,20 UAH ( -5,0%)
from 20 pcs : — 167,80 UAH ( -10,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Technical documentation

ДаташитДаташит (771Kb)

Изображение товара

Sensor GY-271 HMC5883L

Product description format_size zoom_out zoom_in

The GY-271 module on the HMC5883L microchip is a three-axis digital magnetoresistive compass (three-coordinate magnetometer). It is used in positioning systems, tourist equipment and is especially needed in aircraft models, multicopters.
On the board of the GY-271 module there are pull-up resistors necessary for reliable operation, as well as a dc/dc converter, which allows the module to be powered from 5V. In general, the module can work with controllers with 5V signal level via the I2C bus. Three magnetoresistive sensors are used as sensors. Algorithms collect information from magnetometers and other sensors through the I2C bus without the involvement of the system processor.
To use it as a conventional compass for orientation on the ground, it is necessary to strictly fix the board horizontally, because any tilt will lead to the inclusion of the 3rd axis in the work, which will take on part of the horizontal components of the Earth's magnetic field.

Key Features:

  • Supply voltage: 3.3-5V
  • Interface: I2C
  • Sensor sensitivity: 5 milliGauss.
  • Measuring range: ±1.3-8 Gauss
  • Dimensions: 15x15x4 mm

Module schematic diagram:

Connection diagram:


Depending on the SCL and SDA controller legs prescribed in the code, they may be different. For programming, you can use the libraries Library1 or Library2 . The first contains a sketch of an example (code) for use in Arduino.
More detailed characteristics of the magnetometer can be found in datasheet .

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown



Наш адрес и телефоны:   Украина, г. Днепр,
ул. Новокрымская 58 (на углу пересечения с ул. Матросская)
+38 (067) 565-89-78

» Контактная информация и схема проезда		  

Отправляем заказанные товары во все регионы Украины : Александрия, Винница, Житомир, Запорожье, Ивано-Франковск, Киев, Кировоград, Краснодон, Львов, Луцк, Мелитополь, Николаев, Одесса, Очаков, Полтава, Переяслав-Хмельницкий, Светловодск, Трускавец, Ужгород, Чоп, Энергодар, Фастов, Херсон, Харьков, Черкассы,Чернигов, Южноукраинск и другие.

» Подробнее о доставке товаров
   2004—2022 (c) ЧП «ВОРОН».
Все права защищены.