The storage box consists of a common case with separate 1.5ml containers (72 pcs), each with its own lid. The containers can be removed from the box individually. The containers are made of pure polypropylene.
Overall dimensions of the storage box: 179 mm x 97 mm x 52 mm.
Key features:
The storage box is drop-resistant. When dropped, the containers do not open and the components do not spill out.
There is no gap at all between the stopper and the «capsule», so even the smallest SMD components can be stored, down to 0201 components or even smaller 01005.
The position of individual containers in the storage box is easy to change.
The side and lid of each container have surfaces for writing with a permanent marker, so the labels hold up quite well even with constant rubbing by fingers.
The marking is easily removed with a cotton swab moistened with alcohol.
Approximate container capacity:
1206 resistors, about 300 pcs.
0805 resistors, about 400 pcs.
0603 resistors, about 700 pcs.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Вадим Менеджер
unknown