The controller is designed to work with a brushless motor.
Maximum power 350W.
Supply voltage 36VDC.
Red ,
yellow ,
green ,
blue and
black connection of the motor tachometer.
Orange and red - enable the controller, to enable them you need to close them.
Separate wires White and brown with a white stripe - Used for the controller to teach itself the direction of rotation of the motor. For self-learning, you need to remove the load from the motor, short-circuit these wires and then apply power to the controller.
1. If the motor rotates in the right direction, open the wires and turn off the power.
2.If the motor rotates in the opposite direction, you need to open the wires and after 2-3 seconds close them back. The motor will rotate in the opposite direction, then open the wires and turn off the power.
The controller will remember these settings.
Gray and black - brake. When closed, the power is removed from the motor, and when it is opened, the previous operation is restored.
Gray and orange are brake indicators.
Black , green and red - motor speed control. The red wire should be 4.2-5V, if this voltage is not present, then the controller is turned off or faulty. Black is a minus. When the voltage on the green wire changes 1-4.2v, the motor will increase or decrease the speed proportionally.
.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
