"Cold welding" or "Fast steel" - this is the name of the fast curing composite polymer adhesive.
It is a cylindrical bar, two-layer, GRAY color. Packaged in a plastic flask.
The composition is intended for very fast and reliable gluing, repair, sealing of joints, as well as for the restoration of lost fragments of products made of ferrous and non-ferrous metals, wood, plastic, ceramics, glass.
Operating temperature range from -60°С to+260°С. Provides reliable repair in conditions of high humidity, at low temperatures (down to -10°C), provided that the mixture is mixed in a warm room.
The fundamental difference from liquid two-component glue is, first of all, in ease of use, especially in the field (for example, repairing a car on the way). After all, it is much more convenient to simply knead a small piece of "cold welding" in your hands - and the composition is ready for use (mixing the components of liquid glue is somewhat more difficult).
The second advantage is that the consistency of the composition is close to plasticine, it adheres to vertical and ceiling surfaces, does not drain, unlike liquid glue. It is easy to form an element of the desired shape from such “fast steel”, or to form a reinforced seam when gluing. You can also reinforce the seam with a reinforcing mesh, metal or polymer.
After complete curing, the composite can be easily sanded and painted.
Benefits
Steel hardened super putty, Hi-Gear Fast Steel adheres much more strongly than epoxy.
Mixes easily by hand. Even under water it has excellent adhesion to all materials and to oily surfaces.
Hi-Gear HG6002 stops leaks forever! Does not dissolve in automotive fluids.
Cures in 5 minutes, cures in 15 minutes, cures completely in 1 hour.
Can be painted, drilled, threaded, machine-lathe, filed, abraded.
Characteristics
-
color: dark gray
-
density: 1.9 g/cm³
-
compressive strength: 3217 kg/cm²
-
shear strength: 143 kg/cm²
-
tensile strength: 1072 kg/cm²
-
Rockwell hardness: 85
-
maximum operating temperature+260°C
Recommendations for use
To activate the mixture, it is necessary to cut off a fragment of the required volume and knead it well in your hands so that the components are properly mixed.
It is recommended that you wear rubber gloves or lightly moisten your fingers with water to reduce the glue sticking to your hands.
When finalizing the seam, it is also best to do this with wet fingers.
When repairing under water or on an oily surface, you need to press the composition until it sticks to the surface and stops the leak, fixing for 5-10 minutes before hardening
The setting time is 5-10 minutes.
The curing time is 1-1.5 hours, depending on the temperature.
Weight 57 grams.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
.jpg)
