Two-component, two-component, constructional fast drying acrylic adhesive. Viscous, can be used on vertical surfaces.
For bonding metal, ceramics, wood, glass, crystal, composite materials.
Resistant to air, water, oils.
The joint has sufficient elasticity to withstand shock loads, vibration, thermal expansion of the connected parts.
Can be used to assemble plastic panels, oil pumps, water pumps, bumpers, instrument panels, industrial tanks and pipes in automobiles and agricultural vehicles.
Adheres to poorly degreased surfaces.
Wide operating temperature range. from -60°C to+200°C.
Suitable for bonding with a maximum assembly gap of 0.5 mm, with an activator it can fill gaps up to 1 mm. Not recommended for gluing greasy plastics, i.e. polyolefins (PP, PE, teflon, silicone rubber, etc.)
Store in a cool dry place between 8°C - 30°C.
Specifications:
-
component A color: light green
-
component B color: light pink
-
viscosity (cps, 25°С): A: 4000 ±500, B: 4000 ±500
-
setting time: 5-10 minutes (at a temperature of at least 25°C)
-
functional strength gain time: 10-30 minutes.
-
curing time: 24 hours
-
tensile strength (steel × steel):> 18 mpa
-
impact strength (kJ/m3):> 10
-
filling gap: 0.05 - 0.5 mm.
-
operating temperature range: from –60°С to+200°С
-
packing: tubes of 2 pcs in a blister
-
weight: 16 grams
Recommended use:
To start polymerization, it is necessary to mix components A and B of the adhesive in a 1: 1 ratio. Please note that you need to use the mixture within 1-2 minutes, before setting.
Apply the mixture to the surfaces to be bonded, then press the surfaces together.
Surfaces must be pre-cleaned and degreased.