The adhesive is designed for bonding polystyrene parts and polystyrene scale models.
Main adhesive component – butyl acetate. Bonding is achieved by partially dissolving the plastic on both surfaces being bonded.
Specifications:
adhesive type: chemical welding
packing: glass bottle
net volume: 10 ml
Application:
Apply a thin layer of adhesive to both parts and press firmly together, or join the parts and apply adhesive into the gap between them. The mating surfaces dissolve to a shallow depth, and when pressed together a chemical welding effect occurs. The result is a virtually solid, single part.
The joint is hard and strong.
Bonding time 10-15 minutes; full drying time depends on the amount of glue applied and ranges from 4-6 hours to a day.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown