У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
The W5500 network module is an Ethernet controller with an SPI interface based on the W5500 chip from the Korean company WIZnet, it is a newer model of its predecessor W5100. The module also has a chip strap, a 3.3 V stabilizer and an RJ45 connector with a matching transformer. Using this module, you can transfer data both over the local network and over the Internet. The module can be powered from both 3.3 V and 5 V. Logic levels on the information pins are 3.3 V, but they are tolerant to 5 V levels, which means you can connect it to Arduino operating from both 3.3 V and from 5 V.
Supports up to 8 independent modules simultaneously
Power Down Mode
Wake on LAN via UDP
High Speed SPI (SPI MODE 0, 3)
Internal memory (buffer) 32 kB for Tx/Rx
Auto detect support (full and half duplex, 10 and 100-based)
Doesn't support IP fragmentation
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
