It does not coke even with a tenfold addition of cement due to PTFE in the composition.
Suitable for guides with rubber bushings.
The anthers of the guides are exposed to external influences; contact with reagents, pollution, water. As a result, they are destroyed, change shape, elasticity and can no longer provide 100% protection of bushings and guides from rust, skewing of the pads and seizing.
Benefits
-
Resistant to water washout
-
Does not coke
-
Does not cause deformation and destruction of rubber boots
-
Protects guides from corrosion
-
Heat and frost resistant
The new MC 1630 grease is excellent for lubricating caliper guides, including those with rubber bushings. Temperature and viscosity characteristics allow the grease to operate under extreme conditions at temperatures from -50⁰C to+200⁰C.
MC 1630 protects against sticking, coking and drying of the guides, providing even pad wear and safe braking.
Does not affect the rubber guide bushings, extending their service life.
APPLICATION:
1) Apply a thin layer (0.1 mm) to the clean surface of the rails.
2) Install the guides in the caliper.
For more information on the characteristics of the grease, see the page
MS-1630manufacturer's website.
.jpg)
![Caliper Guide Grease MS-1630 VMPAUTO [stick 5 g]](/files/pic/kontchim/040834/040834-1-s.jpg)
Декларация о соответствии
![Caliper Guide Grease MS-1630 VMPAUTO [stick 5 g]](/files/pic/kontchim/040834/040834-1-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
