Circular saw BG-3115, 480W, 8800 rpm

Изображение товара

Product description format_size zoom_out zoom_in

A device such as a circular is used in numerous woodworking and furniture industries and factories. And also increasingly it is found as a home tool for sawing boards. However, a circular saw is a large and very powerful tool designed to cut only large workpieces. Therefore, a miniature analogue of this tool was created - a table circular saw.

The desktop, on which a linear marking 10 cm long (7 cm to the left and 3 cm to the right) is applied, is made of aluminum and has dimensions of 160 × 160 mm. The zero marking value is located on the same straight line with the saw blade.

In addition, the tool is equipped with two guide stops: straight and protractor. A straight stop with a lock is set for movement along the X axis and is used in conjunction with linear markings. Based on this markup, you can determine how much material you need to leave and how much to cut. In addition, by fixing the stop, you can quickly and efficiently make a series of the same type of parts.

The protractor is set to move along the Y axis. It can be used to make angled cuts. To do this, you need to install this guide, set the required angle value on the angular scale, fix this value, and move the guide along with the workpiece. The result should be a smooth, accurate cut at an exposed angle.

In addition to the guides, the desktop circular is equipped with a fairly technological and at the same time simple protection - a protective screen. However, the whole manufacturability is as follows: the saw blade always remains under the protective screen due to the fact that the screen moves as the workpiece moves along with it, gradually rising and falling, and as a result takes its standard position. Thus, you always remain protected from possible injuries.

It is noteworthy that this model is also equipped with a dust outlet, to which you can connect a building or household vacuum cleaner. To do this, the tool is equipped with a special silicone nozzle. This function will ensure cleanliness of the room during operation, especially if you work in a living room and not in a workshop.

Despite the small size of this circular saw, its motor power is as much as 480 watts. Also, for its miniature dimensions, it can be considered quite noisy, which can make work somewhat uncomfortable.

It is noteworthy that the saw blade also gains decent speed - up to 8800 rpm. The disc is 60 mm in diameter and 0.5 mm thick. In this case, the maximum cutting depth can be 13 mm.

The presence of this desktop circular in any modeler will reduce the consumption of his working time and effort at times. And the presence of two guides will ensure the accuracy and efficiency of the work performed.