UVGO-9600 UV adhesive 50ml for glass, metal, plastic.
Single-component adhesive, UV or visible light curing. Acrylate polymerization reaction occurs under the influence of light radiation.
Application: bondingplastic to plastic (main application), glass to glass, plastic or glass to metals such as steel, aluminium, copper , electroplated coatings. One of the details must be transparent.
For bonding on small and medium work surfaces.
Packing: opaque plastic bottle
Net volume: 50 ml
Pros:
Does not require mixing, instantly hardens at the right time, almost odorless, high adhesion to specific materials, does not require mechanical treatment or activation of surfaces before bonding.
The fastest curing occurs when irradiated with ultraviolet light with a wavelength of 395nm.
The initial polymerization of this type of adhesive occurs within 10-30 seconds depending on the radiation source, the final curing proceeds autocatalytically within 30-60 minutes without exposure to light.
Instructions for use:
Use only for the corresponding types of material specified in the purpose of the adhesive!
Do not suck excess glue back into the tube!
Do not allow direct light to enter the tube! Do not work in direct sunlight!
Wipe the surfaces to be bonded, degrease if possible. Apply the required amount of adhesive to one of the surfaces. Align the parts, make sure there are no air bubbles. If necessary, repeat the alignment of parts. Fix parts securely. Expose adhesive to ultraviolet source or direct sunlight. Before use, it is recommended to make a trial illumination of a small amount of glue and select the optimal exposure time. Immediately after the adhesive has set, fixing can be stopped. If the product is subjected to mechanical stress, it is advisable to allow time for the final polymerization.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
