Soldering stations with replaceable T12 cartridges (tips) handle high-heat-capacity work very well. The thermocouple is built into the heater with no gap between heater and tip metal. This gives an instant response to tip temperature drops and adds the power needed to hold the set temperature.
Soldering station contents:
1. Control and power unit
2. Extended iron handle for removable T12 tips
3. Replaceable T12-K cartridge (knife tip)
4. Mains power cable
Getting started:
1. Insert the cartridge (tip) into the iron and lock it
2. Connect the soldering iron cable to the control and power unit
3. Place the iron in the stand
4. Connect the power cord to the socket on the back of the power and control unit
5. Flip the power switch on the back of the power and control unit
To enter the settings menu, press and hold the encoder (temperature knob) on the front of the station's power and control unit for a few seconds.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown