Universal two-component "cold weld" adhesive for bonding metal, glass, ceramics, stone, cement, porcelain and plastic. Has good adhesion to the bonded surfaces. Cures to a very strong and hard joint with no shrinkage. Corrosion-resistant, waterproof. After full curing, the joint can be machined (drilled, milled, sanded) and painted. Component No. 1 is covered with component No. 2 (like a roll). To activate the adhesive, cut the required amount from the stick and knead it thoroughly for 1-2 minutes until uniform in consistency and color. Press the compound firmly into the crack or onto the bonded surfaces within 2-4 minutes. Materials must be cleaned of rust and dust. Hardening takes place in 10-30 minutes. Full drying in 24 hours. If the bonding area is wet or leaking, after applying the compound it must be pressed firmly and held in place until it hardens.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown