Internal battery resistance meter, YR1035+

Изображение товара

Product description format_size zoom_out zoom_in

• Compatible battery types:
  • Acid (acidic)
  • Li-Ion, Li-po (lithium-ion/polymer)
  • LiFePO4 (lithium iron phosphate)
  • Alkaline cell (alkaline)
  • Ni-MH, Ni-Cd (nickel-metal hydride and nickel-cadmium)
  • disk, etc.
• Operating frequency: 1000Hz
• Power: built-in lithium battery, 2000 mAh
• Display: 2.0" diagonal; internal resistance readings: 2000 counts. Voltage data: 99999 counts. Updated 4 times per second.
• Resistance measurement range:
  • Resistance: 20 mOhm/200 mOhm/2 Ohm/20 Ohm/200 Ohm
  • Maximum resolution: 0.01 mΩ/0.1 mΩ/1 mΩ/10 mΩ/0.1 Ω
  • Accuracy: 0.7%+7/0.5%+5/0.5%+5/0.5%+5/0.6%+5
  • Display mode: 22.00 mΩ (when ZR function is on)/220.0 mΩ/2.200 Ω/22.00 Ω/220.0 Ω
  • In the range of 5%-95% transmission, when it is not within this range (less than 5% transmission range or greater than 95% transmission range), the error may be higher than the specified accuracy.
• Voltage measurement: ±(% reading +% range)
  • Range: 1 V/10 V/100 V
  • Maximum resolution: 0.00001 V/0.0001 V/0.001 V
  • Accuracy: 0.15+0.015/0.15+0.010/0.15+0.015
  • Display mode: 0.99999V/9.9999V/99.999V
• Positive and negative symmetry error ±(0.012%+5 words)
• Temperature drift within normal use temperature (10℃-40℃) 100ppm/℃
• Maximum voltage between any terminals: 100 V. Do not exceed the specified measurement range!
• Power consumption:
  • <60 mA (range 200 mOhm and above, backlight off at 3.7 V)
  • <120 mA (range 20 mOhm, backlight off at 3.7 V)
  • <10 mA (enter low power mode)
  • 0 mA (disable)
• Operating temperature: 10℃-40℃ Internal resistance temperature coefficient: 0.1 * (prescribed accuracy)/℃ (<18℃ or >28℃)
• Storage temperature: -20℃-60℃
• Dimensions (LxWxH): 120x60x40 mm
• Weight: 320 g

• Meter YR1035+ - 1 pc.
• Battery holder - 1 pc.
• Kelvin probes with crocodile tips - 1 pc.
• Kelvin probes with needle tips - 1 pc.
• Instructions in English - 1 pc.