Features:
Accuracy ±0.5°C from -10°C to +85°C
User-selectable resolution from 9 to 12 bits
Data is transferred over the 1-Wire® serial interface
Unique, unalterable 64-bit serial number
Multidrop capability
Parasite power - available
Operating voltage from 3.0V to 5.5V
Operating range from -55 to +125 °C
Temperature alarms (°C) 2, programmable, nonvolatile
Version powered from the data line (DS18B20-PAR)
TO-92, 150mil 8-pin SOIC, or 1.98mm x 1.37mm ball-lead package (±2.0°C)
Description:
The DS18B20 is a digital I/O thermometer with ±0.5°C accuracy. Data is read over a 1-wire serial bus in two's complement code of 9 to 12 bits (user-programmable), with an LSB of 0.5°C to 0.0625°C.
When used as a thermostat, the DS18B20 has user-programmable high (TH) and low (TL) temperature alarm thresholds stored in internal nonvolatile memory (EEPROM). An internal flag register is set when a threshold is crossed, i.e. when the measured temperature is above TH or below TL. If thermostat operation is not needed, the two EEPROM bytes reserved for the thresholds can be used for general-purpose nonvolatile storage.
Each DS18B20 has a unique, unalterable 64-bit serial number used as the sensor's node address. This allows many DS18B20 chips to share one 1-Wire bus. The DS18B20 can be powered locally from 3.0V to 5.5V or configured to be powered over the 1-Wire data line.
The DS18B20 comes in TO-92, 150mil 8-pin SOIC and 1.98mm x 1.37mm ball-lead (flip-chip) packages. The ball-lead version is rated at ±2.0°C accuracy. For applications that do not need ±0.5°C accuracy, the DS1822 with reduced ±2.5°C accuracy is available as a cheaper fully compatible part (TO-92, SOIC package only).
The DS18B20 is supported by the DS1701k demo kit.