Micro drill CF1011 [engraving machine]

Зображення товару

Product description format_size zoom_out zoom_in

This versatile miniature electric drill is analogous to the well-known DREMEL products. Due to the wide popularity of the instrument, the name has already become a household name, and all such instruments are referred to simply as "dremel".
The straight multi-grinding machine is applicable for drilling, grinding, rust removal, polishing, cutting, engraving, etc. Allows to process steel, wood, glass, ceramics, plastics and other materials.
Smooth adjustment of engine speed allows you to use different types of attachments.
In this model, the adjusting wheel is located very well - it is easy to adjust, and at the same time, an accidental change in the position of the regulator is practically excluded.
Installation of a flexible shaft is possible (supplied in the kit). With a flexible shaft, it is possible to carry out both engraving work and drilling or milling in hard-to-reach places. The spindle has a mechanical lock for easy changing of the working tool.
Four interchangeable collets for mounting accessories, drills and cutters with different shaft diameters.
The drill body has a swing-out loop for vertical hanging when working with an installed flexible shaft (i.e. like an engraving machine).
A plastic case with a transparent front cover, in which all attachments are laid out and fixed in special nest cells, can be hung on the wall (there are holes for hooks on the back wall), thereby turning the suitcase into a wall cabinet, all attachments will be visible and easily accessible.

ATTENTION!
The flexible shaft must be lubricated before use. To do this, remove the wire core from the braid and cover it with a grease (any, for example Litol-24 or CIATIM).
During operation, the shaft must also be periodically lubricated.
A good result (reduction of frictional power losses, increase in the resource of the flexible shaft) is obtained by a grease with molybdenum disulfite, for example SLGM100.

Main characteristics:

Power -130 W
Power supply - 230 V, 50 Hz
No load rotation speed - 8000 - 33000 rpm
Packing size - 370 x 350 x 50 mm


Equipment:

A set of 165 items:
- drill, 1pc
- flexible shaft, 1 piece
- collet nut, 1 pc.
Nozzles:
- collet chuck, 4 pcs.
- diamond grinding wheel, 10 pcs.
- fiberglass reinforced cutting discs, 5 pcs.
- abrasive discs, 62 pcs.
- rubber polishing disc, 1 pc.
- grinding drums, 2 pcs.
- grinding discs, 22 pcs.
- grinding disc, 1 pc.
- polishing stones, 1 pc.
- wire brushes, 9 pcs.
- polishing felt, 7 pcs.
- whetstone, 1 pc.
- sharpening discs, 10 pcs.
- cores, 2 pcs.
- polishing paste, 2 pcs.
- bur-cutters, 6 pcs. (2 x 1.5 mm, 2 x 2.3 mm, 2 x 3.1 mm)

Weight: 0.805 kg